HP Envy 6055e WiFi Setup: A Step-by-Step Guide

HP Envy 6055e WiFi Setup

The hp envy 6055e wifi setup is a compact all-in-one built for homes and small offices that want to print, scan, and copy without a tangle of cables. As an HP+ model, it treats wireless connectivity as essential rather than optional. The printer needs an internet connection to activate HP+, receive firmware updates, and support features such as Instant Ink and remote printing through the HP Smart app. Getting the WiFi setup right from the start saves plenty of frustration later, so this guide walks through the process from unboxing to your first wireless print, and explains what to do when something goes wrong.

What to Have Ready

A few minutes of preparation make the setup almost effortless:

• Your WiFi network name and password. The HP Envy 6055e WiFi Setup supports both 2.4 GHz and 5 GHz bands and works most reliably with WPA2 security. If your router is set to WPA3-only, switch it to a mixed WPA2/WPA3 mode first.
• A phone, tablet, or computer connected to the same network the printer will join. Avoid guest networks, which often prevent devices from seeing one another.
• An HP account. HP+ printers require you to sign in during setup, so creating a free account in advance speeds things up.
• Bluetooth turned on if you are using a phone or tablet, since the HP Smart app uses it to discover the printer.

Place the printer near the router for the initial connection. You can move it to its permanent spot afterward.

Read More: hp color laserjet pro mfp 4301fdw printer

Preparing the Printer

Remove all packaging tape, including the pieces inside the scanner lid and around the cartridge door. Connect the power cord and press the Power button, which sits on the back of the printer next to the Wi-Fi button and USB port. The Edge Lighting status bar on the front glows as the printer starts up.

Open the cartridge access door, insert the black and tri-color cartridges until they click, and close the door. Load plain letter or A4 paper into the input tray and slide the width guides against the stack.

A brand-new HP Envy 6055e WiFi Setup boots straight into wireless setup mode and stays there for about two hours, signaled by the Edge Lighting pulsing purple. If the pulsing has stopped, or the printer was previously set up, press and hold the Wi-Fi button and the Power button on the back together for about five seconds until the light bar pulses purple again. This restores the network defaults and reopens the setup window.

Connecting Through the HP Smart App

HP Smart is the recommended way to connect the Envy 6055e and the only way to finish HP+ activation. Download it from your device’s app store or visit 123.hp.com, which points you to the right version.

Open the app, sign in with your HP account, and grant the location and Bluetooth permissions when a phone asks for them; the app cannot see the printer without them. Then:

1. Tap the plus sign or “Add Printer.” The Envy 6055e should appear automatically as a printer in setup mode. If not, choose the option to set up a new printer and let the app search again.
2. Select the printer. Your phone may briefly join the printer’s temporary setup network; allow this if prompted.
3. Pick your home network from the list and enter the password, paying attention to capitalization.
4. Wait while the printer joins the network. The status bar pulses during the attempt and settles to a steady blue once connected, usually within a minute.
5. Work through the remaining screens: accept the HP+ terms, confirm your account, and decide whether to enroll in Instant Ink. The app also checks for firmware updates, so leave the printer powered on until they finish.
6. Print the test page when offered. A clean page confirms the wireless setup is complete.

From this point you can print, scan, and monitor ink from any room, and from outside the home when remote printing is enabled.

Using WPS Instead

If your router has a WPS button, you can pair the two directly. Press and hold the Wi-Fi button on the back of the printer for about three seconds until the Wi-Fi light blinks, then press the WPS button on the router within two minutes. When the light stops blinking and stays lit, the printer is on the network. You still need to open HP Smart afterward to complete HP+ activation, but the app will find the printer immediately.

Wi-Fi Direct as a Backup

Wi-Fi Direct lets a device connect straight to the printer without a router, which is useful for guests or during an internet outage. Press the Information button on the control panel to print an information page listing the Wi-Fi Direct name and password, then join that network from your phone or laptop and print normally. Because the printer cannot reach the internet this way, HP+ features will not work over Wi-Fi Direct.

Adding the Printer to Your Computers

Once the printer is online, Windows and macOS can find it on their own. On Windows, open Settings, go to Bluetooth & devices, then Printers & scanners, and click Add device. On a Mac, open System Settings, choose Printers & Scanners, and click Add Printer; the Envy 6055e shows up as an AirPrint device. iPhones and iPads print through AirPrint with nothing extra to install, and Android phones can use Mopria or HP Smart. Installing HP Smart on each computer is still worthwhile for its full scanning tools and ink monitoring.

Reconnecting After a Router Change

A new router, network name, or password breaks the printer’s saved connection. The fix mirrors a first-time setup: hold the Wi-Fi and Power buttons for five seconds until the status bar pulses purple, then open HP Smart and add the printer again with the new details. The app simply updates the existing entry.

Troubleshooting Common Problems

A handful of issues cause most setup failures on this printer.

The app cannot find the printer. Confirm the Edge Lighting is pulsing purple, Bluetooth and location services are on, and your phone is on your home WiFi rather than cellular data or a guest network. Turn off any VPN during setup. Restarting the printer, router, and phone clears many discovery problems.

The connection fails after entering the password. Re-enter it carefully. If it still fails, check whether the router uses MAC address filtering or client isolation and disable those temporarily. Some mesh systems that merge both bands under one name occasionally confuse the printer; splitting the bands or briefly turning off 5 GHz can help.

The printer drops offline later. Move it closer to the router and away from microwaves, cordless phones, and thick walls. Reserving an IP address for the printer in your router settings prevents the address from changing, a frequent cause of “offline” status. You can also set a static IP in the printer’s Embedded Web Server by typing its IP address, shown on the information page, into a browser.

The status bar glows amber. Amber points to a hardware issue such as an empty tray, a paper jam, or a cartridge problem rather than a WiFi fault. Clear it and the wireless connection resumes on its own.

For anything stubborn, the Diagnose & Fix tool inside HP Smart, or the separate HP Print and Scan Doctor utility for Windows, can detect and repair many network problems automatically.

Keeping the Connection Stable

Leave the printer powered on so it can receive updates and stay registered with HP+, keep your router firmware current, and avoid moving the printer between networks unnecessarily. With those habits in place, the HP Envy 6055e WiFi Setup handles the rest quietly in the background, ready whenever you need a document or photo.